← Battery Data · Entity: BatteryGroup

T6 Battery

Aliases: LB3 · LBN3 · 66LB · Standard family: DIN/EN (low height)

Direct answer: The T6 battery is a DIN/EN (low height)-family group — a 12V lead-acid case of 278 × 175 × 175 mm with SAE post terminals, typically 60–70 Ah and 600–640 cold cranking amps (EN 50342 (−18°C)).

Quick facts

Identification

Entity type	BatteryGroup
Entity ID	`WBH-BAT-GROUP-T6`
Group name	T6
Aliases	LB3 / LBN3 / 66LB
Standard family	DIN/EN (low height)

Specification

Voltage	12V	Standard-defined
Typical capacity	60–70 Ah	World Battery Hub derived — cross-source range
Typical CCA	600–640 A	World Battery Hub derived — cross-source range
Dimensions (L×W×H)	278 × 175 × 175 mm	Standard-defined
Terminal	SAE post	Standard-defined
Typical weight	16–18 kg	World Battery Hub derived — cross-source range

Value types — Standard-defined: fixed by the group standard (voltage, dimensions, terminal); Manufacturer-reported: a representative value from manufacturer datasheets; World Battery Hub derived: a cross-source range aggregated by World Battery Hub from manufacturer datasheets. None is a substitute for a specific battery's datasheet.

Standards & measurement context

Naming standard	DIN/EN (low height)
CCA basis	EN 50342 (−18°C)

The CCA figure is defined by its test standard — values from different standards are not directly interchangeable. Capacity values are typical ranges, not a substitute for a specific battery's datasheet.

Applications

European midsize cars
Low-tray applications

Technology variants

Flooded / EFB / AGM — see the lead-acid type family for the design trade-offs behind the label.

Equivalent capacity class

~60–70 Ah — other groups in a similar capacity class. This is a capacity comparison, not a physical interchange: dimensions and terminals differ between naming families.

Testing

Relevant methods for this group: CCA testing, capacity testing, load testing — see the testing methods for procedures and standards.

Sources & verification

CCA 600–640 A — EN 50342 (−18°C)

Evidence card — how this entity's data was established

Basis: EN 50342-2 case codes (T6 = LB3, 175 mm height) + manufacturer datasheets

EN 50342-2 reference tables (case codes L0–L6)
Manufacturer datasheets (Varta, Bosch, Banner, Exide)

Confidence: High · Last verified: 2026-09

Low-height (175 mm) variant of the 278 mm (H6/L3) case. Typical values shown.

Last verified: 2026-09

Values are cross-verified typical ranges, not a substitute for a specific battery's datasheet. Return to World Battery Hub.